VSA  Inc VSA Inc. | 800-888-2140 | Lincoln, NE | Fax: 402-325-8033 | sales@vsa1.com
  • Imagine Communications VTM-2400

Imagine Communications VTM-2400

  • Call For Pricing

 

Specifications
Video  
Inputs A and B (Digital) 1080i/60, 1080i/59.94, 1080i/50, 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98, 1080p/30sF, 1080p/29.97sF, 1080p/25sF, 1080p/24sF, 1080p/23.98sF, 720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/24, 720p/23.98, 525/59.94 or 625/50 auto detect
Data Rate 270 Mb/s, 1.485 Gb/s auto detect
Level 800 mV, nominal
Return Loss ?-15 dB, 5 MHz to 1.485 GHz
Connectors 4 BNC, Hi-Z looping
Reference  
Input NTSC/PAL blackburst or composite video, tri-level sync auto-detect (per SMPTE 274M)
Signal Level NTSC: blackburst 286 mV pk-pk ±6dB
PAL: sync and burst 300 mV pk-pk ±6 dB
Tri-level: 600 mV pk-pk ±3 dB
Connectors 2 BNC, Hi-Z looping
Return Loss ?-40 dB, 100 kHz to 5 MHz
XGA Output  
Output Level 1 or 0.7 V pk-pk menu-selectable
Horizontal Sync 48,363 Hz ±1%
Vertical Sync 60.004 Hz ±1%
Audio (VTM-A3-OPT 1 Option)
Input (Analog) 4 monophonic or 2 stereo channels, balanced or  unbalanced
Maximum Input Level +24 dBu
Input Impedance ?20 k ohms
Connector 37 pin D-sub male
Input (Digital) 4 AES/EBU
Input Impedance 75 ohms nominal
Connector 4 BNC
Output (Analog) 4 monophonic or 2 stereo channels, balanced or unbalanced
Output Level +4 dBu ±1 dB with input at reference level
Maximum Output Level +24 dBu
Output Impedance 10 ohms unbalanced, 20 ohms balanced (nominal)
Connector 37 pin D-sub male
Control  
GPI Input selection, momentary closure
Input Impedance 10 k ohms returned to 5 V
GPO Contact closure on selected alarm
Connector 15 pin D-sub female
Remote RJ11 female for use with the RCU-VTM-2400
Display  
General Picture, waveform, vector and audio or alarm simultaneously in a 4-quadrant display, or a full-screen display of each of these separately 
Waveform YCBCR, RGB, YRGB
Sweep Time Base 1 H, 2 H or 3 H with x1, x5, x10 magnification
1 V, 2 V or 3 V with x1, x5, x10, x25 magnification
Waveform Accuracy ±1%
Vector CR vs. CB
Vector Accuracy ±1°
Power Requirements
Power Input 90 to 260 VAC, 50/60 Hz, nominal 90 VA maximum
Mechanical  
Dimensions (H x W x D) 1.75 x 19 x 15.5 in. (4.5 x 48.3 x 39.4 cm)
Weight 8.25 lb (3.74 kg) 
Environmental  
Operating Temperature 32° to 122° F (0° to 50° C)
Storage Temperature -40° to 149° F (-40° to 65° C)
Humidity 90% maximum (non-condensing)
Operating Altitude 6562 ft (2000 m) 
Pollution Degree 2
Standard Accessories Operators manual
GPI/GPO breakout
Rackmount kit
Power cord

 

        
HD Multiformat OnScreen Monitor

 


No longer available


The VTM-2400 multiformat onscreen monitor continues the Videotek® tradition of cost-effective monitoring of HD/SD-SDI. Based on the technology developed for the VTM Series™,  the VTM-2400 is an easy-to-operate tool to monitor and measure HD-SDI (1080 and 720) and SD-SDI (525 and 625) signals on any XGA capable monitor. The output display includes video picture, waveform, vector and alarm status or optional audio – each in one quadrant of the screen or any element in a full screen view.

The VTM-2400 also optionally accepts four AES/EBU stereo pairs, four mono or two stereo analog inputs and embedded audio from the SDI inputs. Audio can be displayed as two or four channel bar graph meters with a phase bar and Lissajous readout for each meter pair.

Alarms include:
Video: RGB gamut, loss of signal, loss of video, EDH (SD) and CRC (HD)
Audio: Peak audio and loss of sound for audio

Four presets store user setups are also included for convenience.

■Two passive looping HD/SD-SDI inputs with auto detection of input format
■On screen display of picture, waveform, vector and audio/alarm
■XGA display output
■Alarms include loss of signal, loss of video, EDH (SD), CRC (HD), RGB gamut, peak audio and loss of sound
■Four user presets
■Standards supported: SMPTE 259M-C, SMPTE 292M
Product Options

■Audio option for monitoring of analog, digital and embedded audio
■Remote control panel

Audio Options  
VTM-A3-OPT 1 Analog, AES/EBU and embedded audio for VTM-2000 and VTM-2400
   
Other Options  
RCU-2400 Remote control panel
EPC European power cord
EPC-UK United Kingdom power cord
EPC-AA Australian power cord