Specifications | |
---|---|
Video format |
1080/59.94i, 1080/50i, 1080/24PsF, 1080/23.98PsF, 720/59.94p, 720/50p, 525/60 (NTSC), 625/50 (PAL)? |
Video Input |
HD-SDI: 1.5 Gbps or SD-SDI: 270 Mbps 75? BNC x 2 Analog Composite: 1.0 Vp-p 75? BNC x 1 |
Video Output |
HD-SDI: 1.5 Gbps or SD-SDI: 270 Mbps 75? BNC x 4 Analog Composite : 1.0 Vp-p 75? BNC x 2 |
Signal Process | 4:2:2 Digital Component |
Quantization | HD/SD-SDI: 10-bit, Analog component: 12-bit |
Sampling Frequency |
HD-SDI: Y: 74 MHz C: 37 MHz SD-SDI: Y: 13.5 MHz C: 6.75 MHz |
Frequency Response (Composite I/O) |
NTSC: 100 kHz to 4.2 MHz: -0.5 dB to +0.5 dB, 4.2 MHz to 5.0 MHz: -1.0 dB to +1.0 roll off above 5.0 MHz PAL: 100 kHz to 4.2 MHz: -0.5 dB to +0.5 dB, 4.2 MHz to 5.5 MHz: -1.0 dB to +1.0 roll off above 5.5 MHz |
DG?DP (Composite I/O) | 1% / 1° |
S/N Ratio (Composite I/O) | 60 dB or better (without quantization noise) |
K Factor (2T pulse, Composite I/O) | 1% |
Comb Filter |
2D or 3D comb filter (selected by menu) |
Genlock Input |
BB: NTSC: 0.429 Vp-p / PAL: 0.45 Vp-p or Tri-sync: 0.6 Vp-p 75? or loop through BNC x 1 (Terminate with 75? terminate plug) |
Synchronization Mode | Frame sync mode, Line sync mode, Input sync mode |
System Phase Adjustment |
Frame Sync Mode H phase: -1/2 H to +1/2 H V Phase: -1/2 frame to +1/2 frame Delay: Max: 1 frame +1 H / Min: 1 H |
Line Sync Mode H phase: -1/2 H to +1/2 H V Phase: -1/2 frame to +1/2 frame Delay: Max: 1 H +1/2 H / Min: 1 +2 H |
|
Input Sync Mode H phase: -1/2 H to +1/2 H V Phase: -1/2 frame to +1/2 frame Delay: Max: 1 frame/ Min: +520 clk |
|
Video Function | 12 axis color corrector, RGB color corrector, Proc Amp, and Video Clip |
12 Axis Color Correction |
Saturation and hue setting for following 12 colors individually (R, R-Ye, Ye, Ye-G, G, G-Cy, Cy, Cy-B, B, B-Mg, Mg, Mg-R) |
RGB Color Correction | Balance mode / Differential mode / Sepia mode |
Video Clip | YPBPR Mode / RGB Mode / Composite Mode |
Process Amplifier |
Video Level: 0.0% to 200.0? Y Level: 0.0% to 200.0% Chroma Level: 0.0% to 200.0? Black Level: -20.0% to 100.0? HUE: -179.8° to +180° |
Audio Input (Embedded) |
HD: 16 Channel (Group 1 to 4), 48 kHz, 16-bit to 24-bit, Sync/ Async SD: 12 Channel (Group 1 to 3), 48 kHz, 16-bit to 24-bit, Sync |
Audio Output (Embedded) |
HD: 16 Channel (Group 1 to 4), 48 kHz, 16-bit to 24-bit, Sync/ Async SD: 12 Channel (Group 1 to), 48 kHz, 16-bit to 24-bit, Sync |
Interface | Ethernet: 10 Base-T/100 Base-TX/1000 Base-T, RJ-45 x 2 |
Remote (GPI): 9-pin D-sub?Male?× 1, 7 circuits (IN/OUT) TTL Negative Logic or Make contact |
|
Temperature / Humidity | 0ºC to 40ºC / 30% to 90% (no condensation) |
Power | 100 VAC to 240 VAC ±10% 50/60 Hz |
Consumption |
Approx. 50 VA (47 W) (at 100 VAC to 120 VAC) Approx. 64 VA (52 W) (at 220 VAC to 240 VAC) |
Dimensions / Weight | 430 (W) x 44 (H) x 350 (D) mm / Approx. 3.0 kg |
Consumables (if used 24 hours a day at room temperature) |
Cooling fan: Replace every 6 years. Power unit: Replace every 5 years. |
Accessories | Operation manual, AC cord, Rack mount brackets |
Options |
DCC-70RU: Remote Control Unit (1U type) DCC-70DRU: Remote Control Unit (tabletop type) |
DCC-70DRU Specifications |
|
Interface | Ethernet: 10 Base-T/100 Base-TX RJ-45 x 1 |
Temperature / Humidity | 0ºC to 40ºC / 30% to 90% (no condensation) |
Power | 100 VAC to 240 VAC ±10% 50/60 Hz |
Consumption |
Approx. 18 VA (17 W) (at 100 VAC to 120 VAC) Approx. 22 VA (16 W) (at 220 VAC to 240 VAC) |
Dimensions / Weight | 440 (W) x 78 (H) x 278 (D) mm / Approx. 6.5 kg |
Consumables | Power unit: Replace every 5 years |
Accessories | Operation manual, AC cord |
DCC-70RU Specifications |
|
Interface | Ethernet: 10 Base-T/100 Base-TX RJ-45 x 1 |
Temperature / Humidity | 0ºC to 40ºC / 30% to 90% (no condensation) |
Power | 100 VAC to 240 VAC ±10% 50/60 Hz |
Consumption |
Approx. 18 VA (10 W) (at 100 VAC to 120 VAC) Approx. 24 VA (12 W) (at 220 VAC to 240 VAC) |
Dimensions / Weight | 430 (W) x 44 (H) x 145 (D) mm / Approx. 2.2 kg |
Consumables | Power unit: Replace every 5 years |
Accessories | Operation manual, AC cord, Rack mount brackets |
HD/SD Advanced Color Corrector |
![]() |
Discontinued
High-performance HD/SD color corrector, for precise color correction in real time using 12 color parameters.
In addition to offering black level adjustment and versatile processing, the unit incorporates a frame synchronizer. Dedicated control panels are also available, enabling more efficient operation.
12-axis color correction in real time |
![]() |
Includes a traditional color correction mode
A mode for conventional RGB correction is also included. After general adjustment in this mode, users can switch to more precise color correction in the 12-axis mode. Three color correction modes are available: Balance, Differential, and Sepia.
• Balance mode: RGB-based color correction
• Differential mode: Color correction maintaining white balance
• Sepia mode: Monotone color conversion
Note: 12-axis color correction is not usable when Sepia mode
Vector display |
![]() |
Split before/after display |
![]() |
Clip Level functions
RGB and composite clip functions keep color information within the optimal range.
• RGB clip
RGB clip uses white clip and black clip functions to correct color information in video that is too bright or dark.
• Composite clip
Composite clip automatically adjusts color information in HD video to suit SD signal ranges while preserving the original appearance. By determining differences between color information in HD video and that available with SD video, color inconsistency in simulcasts can be instantly corrected.
Dual independent outputs
Equipped with two HD/SD-SDI inputs and one analog composite input, the unit can process signals from one input at a time and switch between each signal as required.
The unit is equipped with two HD or SD-SDI outputs and one analog composite output. Using dual- outputs, one can be used for precise adjustment with before/after or vector display, while the other is used as the production output.
The analog composite output can be used with SD-SDI signal
Event memory
Color-correction settings can be stored on the unit for instant recall of 100 events. Additionally, the unit's built-in browser can be used to export or save data to an external computer. This makes it easy to use the color corrector when correction settings are edited in the field.
Other features
Video processing controls for: video level, luminance level, chroma level, black level, and hue.
• Frame synchronizer (FS) functions: Frame Sync, Line Sync, and Input Sync modes.
• Embedded audio pass-through: Supports up to 16 channels of embedded audio. Audio is de-embedded before processing and then re-embedded afterward.
Dedicated controllers
Dedicated controllers are available for more efficient color correction work. A tabletop controller provides direct access to parameters, and a portable unit is perfect for control in the field. Up to five controllers can be connected at once for simultaneous control.
![]() |
![]() |
DCC-70RU: Portable version for remote control | DCC-70DRU: Tabletop version |