VSA  Inc VSA Inc. | 800-888-2140 | Lincoln, NE | Fax: 402-325-8033 | sales@vsa1.com
VSA Chicago | 855-376-7164 | Buffalo Grove, IL | Fax: 866-480-6510 | info@vsa1.com
  • Panasonic PT-RZ970 Series

Panasonic PT-RZ970 Series

  • Brand: Panasonic
  • Product Code: PT-RZ970 Series


Model PT-RZ970 PT-RW930 PT-RX110
Power supply 100-240 V AC, 50/60 Hz
Power consumption TBD
DLP™ chip Panel size 17.0 mm (0.67 in)
diagonal (16:10 aspect ratio)
16.5 mm (0.65 in)
diagonal (16:10 aspect ratio)
17.8 mm (0.7 in)
diagonal (4:3 aspect ratio)
Display method DLP™ chip x 1, DLP™ projection system
Pixels 2,304,000
(1,920 x 1,200) pixels
1,024,000
(1,280 x 800) pixels
786,432
(1,024 x 768) pixels
Lens Powered zoom
(throw ratio 1.7-2.4:1),
powered focus
F 1.7-1.9, f 25.6-35.7 mm
Powered zoom (throw ratio 1.8-2.5:1),
powered focus F 1.7-1.9, f 25.6-35.7 mm
Light source Laser diode (laser class: Class 1 (Class 3R for US models)),
light source life*1: 20,000 hours (Normal Mode) / 24,000 hours (Eco Mode)
Screen size (diagonal) 1.27-15.24 m (50-600 in),
1.27-5.08 m (50-200 in) with the ET-DLE055,
2.54-8.89 m (100-350 in) with the ET-DLE030,
16:10 aspect ratio
1.27-15.24 m (50-600 in),
1.27-5.08 m (50-200 in)
with the ET-DLE055,
2.54-8.89 m (100-350 in)
with the ET-DLE030,
4:3 aspect ratio
Brightness*2 10,000 lm (Center) / 9,400 lm 10,400 lm (Center) / 10,000 lm
Center-to-corner uniformity*2 90 %
Contrast*2 10,000:1 (Full on/off, with Dynamic Contrast Mode set to "3" )
Resolution 1,920 x 1,200 pixels*3 1,200 x 800 pixels*3 1,024 x 768 pixels*3
Scanning
frequency
SDI SD-SDI SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i
HD-SDI SMPTE ST 292 compliant, [YPBPR 4:2:2 10-bit] 720/50p, 720/60p,
1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
3G-SDI SMPTE ST 424 compliant, [YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p,
[RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
HDMI/
DVI-D/
DIGITAL LINK
525i (480i)*4, 625i (576i)*4, 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p,
1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/25p, 1125 (1080)/30p, 1125 (1080)/60p,
1125 (1080)/50p, 1125 (1080)/60i, 1125 (1080)/50i, VGA (640 x 480)-WUXGA*5 (1,920 x 1,200),
compatible with non-interlaced signals only, dot clock: 25-162 MHz
RGB fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 20-162 MHz
YPBPR (YCBCR)
fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
Video/YC fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift*6
(from center of screen)
Vertical +50 %, -16 % (powered) +60 %, -16 % (powered) +50 %, -16 % (powered)
Horizontal +30 %, -10 % (+28 %, -10 % with ET-DLE085) (powered)
Keystone correction range Vertical : ±40° (±22° with the ET-DLE085/ET-DLE055, +5° with the ET-DLE030),
horizontal: ±15° (cannot be operated with the ET-DLE030)
Keystone correction range with
optional upgrade kit (ET-UK20)*7
Vertical: ±45°
(±40° with the
ET-DLE150/ET-DLE250/
supplied lens,
±22° with the
ET-DLE085/ET-DLE055),
horizontal: ±40°
(±15° with
ET-DLE085/ET-DLE055)
-
Installation Ceiling/floor, front /rear, free 360-degree installation
Terminals SDI IN BNC x 1 (3G/HD/SD-SDI)
(PT-RZ970 only)
-
HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
RGB 1 IN BNC x 5 (RGB/YPBPR/YCBCR/VIDEO/YC x 1)
RGB 2 IN D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN M3 x 1 for wired remote control
REMOTE 1 OUT M3 x 1 for link control (for wired remote control)
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
LAN/DIGITAL LINK RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX,
compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP)
Cabinet materials Molded plastic
Dimensions (W x H x D) 498 x 200*8 x 581 mm (19-19/32 x 7-7/8*8 x 22-7/8 in) (with supplied lens)
498 x 200*8 x 538 mm (19-19/32 x 7-7/8*8 x 21-3/16 in) (without lens)
Weight*9 TBD
Operation noise*2 41 dB
Operating environment Operating temperature: 0-45°C (32-113°F)*10,
operating humidity: 10- 80 % (no condensation)
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software,
Geometry Manager Pro*11
(ET-UK20*11 Upgrade Kit and ET-CUK10*12 Auto Screen Adjustment Kit)
Supplied accessories Power cord with secure lock, wireless/wired remote control unit,
batteries for remote control (R03/AAA type × 2),
software CD-ROM (Logo Transfer Software, Multi Monitoring & Control Software)

*1
At 20,000 hours, projector brightness will have decreased to approximately half of its original level (Dynamic Contrast Mode: 3, Image mode: Dynamic). Panasonic recommends cleaning or checkup at point of purchase after every 20,000-hour period (approximately). Light source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period.
*2
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3
Input signals that exceed the native resolution will be converted to the native resolution.
*4
Only compatible with dot clock frequency of 27 MHz (pixel repetition signal).
*5
WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*6
Optical axis shift is not supported on the ET-DLE055, and the optical axis is fixed with the ET-DLE030.
*7
Up to a total of ±55° during simultaneous horizontal and vertical correction.
*8
With legs at shortest position.
*9
Average value. May differ depending on the actual unit.
*10
When used in locations from 0 m to 4,200 m (0 ft to 13,780 ft) above sea level in NORMAL mode, and from 0 m to 2,700 m (0 ft to 8,858 ft) above sea level in other modes. If the ambient temperature exceeds 35°C (95°F) when used in locations from 0 m to 2,700 m (0 ft to 8,858 ft) above sea level, or if it exceeds 25°C (77°F) when used in locations from 0 m to 4,200 m (0 ft to 13,780 ft) above sea level, the light output may be reduced to protect the projector.
*11
Geometry Manager Pro and optional upgrade kit are available only with PT-RZ970.
*12
For only PT-RZ970. Available worldwide except the United States.
 

10,000-Lumen Class Ultra-Compact 1-Chip DLP Laser Phosphor Projectors


Available Models

PT-RZ970: 10,000 lm, WUXGA (1920 x 1200) 10,000:1 Contrast Ratio

PT-RW930: 10,000 lm, WXGA (1200 x 800) 10,000:1 Contrast Ratio

PT-RX110: 10,400 lm, XGA (1024 x 768), 10,000:1 Contrast Ratio
(All three models are available with and without standard lens, and in black or white)


High Picture Quality and Long-lasting Reliability

 Combines 1-Chip DLP™ imaging with proprietary SOLID SHINE laser technology for immersive picture quality at 10,000 lm of brightness*1.

 Dynamic Light Control for 10,000:1 contrast*2.

 Accurate white balance and color reproduction in any projection mode.

 Long-lasting picture quality.

 Detail Clarity Processor 3 clarifies the finest details.

 System Daylight View 2 ensures sharp and vivid images in bright environments.


Consistently Stable and Reliable Performance

 Dust-resistant structure with airtight optical block.

 Dual-drive laser optical engine ensures reliable 24//7 operation with light source failover protection.

 Up to 20,000 hours of continuous maintenance-free operation*3.

 Selectable operational modes extend service life to up to 10 years*4.

 Efficient cooling system for stable operation in ambient temperatures of up to 45 °C (113 °F)*5.

 High-speed backup input switching.


Versatile System and Installation Flexibility

 Shares optional lenses with Panasonic 1-Chip DLP™ projector family.

 Compact body and free 360-degree installation (vertical and horizontal).

 DIGITAL LINK supports transmission of uncompressed full HD video and control commands through a single CAT 5e or higher STP cable for distance up to 150 m (492 ft)*6.

 Geometric Adjustment for specially shaped screens.

 Geometry Manager Pro*7 and optional upgrade kit (ET-UK20)*7.

 Auto Screen Adjustment Upgrade Kit (ET-CUK10)*8.


*1 PT-RZ970/RW930 features brightness of 10,000 lm (Center), and PT-RX110 features 10,400 lm (Center).
*2 With Dynamic Contrast Mode set to 3.
*3 At 20,000 hours, projector brightness will have decreased to approximately half of its original level (Dynamic Contrast Mode: 3, Image mode: Dynamic). Panasonic recommends cleaning or checkup at point of purchase after every 20,000-hour period (approximately). Light source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period.
*4 With operating Mode set to Long Life 3, in which mode brightness is lowered to 1,900 lm. 24 hours/day x 365 days/year x 10 years = 87,600 hours. 
Replacement of parts other than the light source may be required in a shorter period.
*5 Light output may be reduced to protect the projector depending on environmental conditions.
*6 150 m (492 ft) transmission available only with ET-YFB200G DIGITAL LINK Switcher for signals up to 1080/60p (dot-clock frequency 148.5 MHz). 
Transmission distance is up to 100 m (328 ft) in other cases.
*7 Geometry Manager Pro and optional upgrade kit are available only with PT-RZ970.
*8 For only PT-RZ970. Available worldwide except the United States.


Optional Accessories

Fixed-focus lens

ET-DLE030


Zoom lens

ET-DLE085

ET-DLE150

ET-DLE250

ET-DLE350

ET-DLE450

ET-DLE055


Ceiling Mount Bracket

ET-PKD130H (6-axix, for high ceiling)*

ET-PKD120H (for high ceiling)*

ET-PKD120S (for low ceiling)*


Projector Mount Bracket

ET-PKD130B


* The ET-PKD130H/PKD120H/PKD120S are used in combination  with the ET-PKD130B (sold separately).
   The ET-PKD130H is recommended when used with the ET-DLE030.