VSA  Inc VSA Inc. | 800-888-2140 | Lincoln, NE | Fax: 402-325-8033 | sales@vsa1.com
  • JVC FS-900BS2N

JVC FS-900BS2N

  • Brand: JVC
  • Product Code: FS-900BS2N
  • $14,500.00

>
Specifications   

Digital Video, Camera to Base

Number of Channels

1 Per Camera

Interface

SMPTE ST259, ST292, ST424

Data Rate

270Mbps, 1.5Gbps, 3Gbps

Input/Output Level

800mVp-p

Input/Output Impedance

75 Ohms

Number of Outputs at Base

2 Per Camera

Digital Video, Base to Camera

Number of Channels

3 Per Camera

Interface

SMPTE ST259, ST292, ST424, HDMI**

Data Rate

270Mbps, 1.5Gbps, 3Gbps

Input/Output Level

800mVp-p

Input/Output Impedance

75 Ohms

Connectors

BNC, HDMI***

**HDMI camera output is only available on Return channel #3 for prompter use, only SMPTE compatible resolutions are supported. All inputs at base unit are SDI.
***Return channel #3 output has both a BNC and an HDMI connector, all other outputs are BNC only.

Video, Genlock

Number of Inputs

1 + Loop Output

Type

Analog Black Burst, Tri-Level

Impedance

75 Ohms

Connector, Camera Unit

Internal

Connector, Base Unit

BNC (x2)

Audio, Camera to Base

Type

Embedded in Camera’s SDI video

Number of Channels

Max supported by camera

Audio, Base to Camera

Number of Channels

2

Type

Balanced Analog Line-Level, mono

Level

+4dBu nominal, +24dBu max.

Connector, Camera Unit

DB9

Connector, Base Unit

DB25

Intercom

Number of Channels

2

Interface

2-Wire or 4-Wire

Compatibility

RTS, Clear-Com

Connector, Camera Unit

XLR-5

Headset MIC Type

Dynamic

Headset MIC Impedance

200 Ohms nominal

Connector, Base Unit

DB25

RCP Camera Control (Remote)

Number of Channels

1 Per Camera

Connector, Camera Unit

Internal

Connector, Base Unit

6 pin Mini-DIN (x3)

Ethernet

Number of Channels

1 Per Camera

Data Rate

10/100/1000 Base-T

Connector, Camera Unit

RJ45 Cat5e

Connector, Base Unit

RJ45 Cat5e (x3)

Timecode

Number, Base to Camera

1 per Camera

Number, Camera to Base

1, from Camera # 1 only

Inputs

Unbalanced, 15Vp-p max

Outputs

Unbalanced, 3Vp-p

Connector, Camera Unit

Internal

Connector, Base Unit

BNC

Tally/GPIO

Number, Base to Camera

3 per Camera (Red, Green, Spare)

Number, Camera to Base

1 Per Camera

Inputs

Short to GND or TTL Low to Activate

Outputs

Relay Contact Closure (30V, 2A max)

Connector, Camera Unit

DB15

Connector, Base Unit

DB25

Electro-Optical

Operating Wavelengths

1471-1611nm

Tx Laser Output Power

0dBm (Class 1 Laser)

Receiver Sensitivity

-20dBm

Fiber Compatibility

Single-mode

Optical Connector Types

opticalCON DUO

Mechanical/Environmental

Dimensions (HxWxD)


Camera Unit

8.2” x 6.7” x 4.2”

Base Unit

3.5” x 19” x 16” (2RU)

Environmental

0 to 50°C, 0 to 95% RH, non-condensing.

Power Input, Base

IEC320, Universal Input, 90-250VAC, 50-60Hz

Power Input, Camera


Remote Power

Hybrid Fiber Connector

Local Power

Battery Mount ((Anton Bauer or (Optional) V-Mount))


 




MULTIDYNE 2RU DUAL INPUT FIBER BASE STATION TRANSCEIVER - NEUTRIK OPTICALCON


The FS-900BS2N (Neutrik Opticalcon) is the base stations for JVC's unique 2-in-1 fiber optic system designed for JVC's GY-HM890 and GY-HC900 camcorders. The system supports 3G-SDI 1080p/60 camera feeds and returns, and takes advantage of the camera's built-in streaming engine for video-over-IP functionality.


Up to two cameras are supported by each base station, and redundant power supplies provide up to 150 watts for each camera, as well as prompters and talent monitors. Its three-in-one configuration provides a more cost efficient solution than other multi-camera solutions previously offered by JVC and other manufacturers


With built-in gigabit Ethernet, the lightweight, 2 RU Base Station also allows video-over-IP, control and advanced configuration. The high quality 1080p video signals are ideal for webcasts, virtual sets, and image magnification (I-MAG) applications. The system integrates easily with any studio, mobile truck, or portable flypack, and connects directly with a facility's switcher, router, intercom, and house sync systems. 


KEY FEATURES

• Cost-efficient two-camera studio configuration with single base station.

• Supports 1080 50/60p 3G-SDI camera feed and returns.

• HDMI / SDI feeds for high-quality HD teleprompters.

• Gigabit Ethernet for Video-over-IP and web-based RCU.

• Dual redundant power supplies.


Related Products